No class E airspace |
Post Reply |
Author | |
clydeps
Groupie Joined: 05 Sep 2015 Location: Australia Status: Offline Points: 72 |
Post Options
Thanks(0)
Posted: 15 Jan 2016 at 6:44am |
Tapping the screen and getting the controlled airspace descriptions up is nice (sometimes have to pan up to see the entire box) but I notice that class E airspace is not included. Nor is it one of the options in the map setup for airspace display, and the boundaries are not shown on the map.
Not a big deal when VFR since I don't need a clearance, but when IFR it's helpful because it's not unusual for controllers to forget to tell me when I leave controlled airspace, or need a reminder to give me a clearance to enter it.
|
|
FlyingCOham
Senior Member Joined: 30 Oct 2015 Location: COS (KFLY) Status: Offline Points: 125 |
Post Options
Thanks(0)
|
It's been DECADES since I've done it but back then I would often file across Class G to a destination on the other side. The clearance was clear: up to the edge of the Class G and after re-entering controlled airspace. In the G there was no "clearance". But there was never a requirement to got a clearance to re-enter controlled airspace.. Have the procedures changed?
|
|
Jim Patton
|
|
clydeps
Groupie Joined: 05 Sep 2015 Location: Australia Status: Offline Points: 72 |
Post Options
Thanks(0)
|
Where were you flying? In Australia there is lots of class G airspace, class E generally starts at 8500' or FL125 - in more remote areas the lowest controlled airspace may be class A at FL180. In the US I think you have to be in Alaska to encounter that. When transiting through class G between controlled airspace sometimes I will get a "leave and re-enter" clearance, other times I'll just be told "control services terminated" - this I think is particularly the case where the next controlled airspace is in a different sector. Usually the next controller will give me the onwards clearance without being asked, but sometimes they forget. I have the airspace on a tablet app, but it would be nice to have it on the IFDs too. It's not obvious to me why class E should be a special case - all the other controlled airspace is shown, as are restricted areas and even danger areas.
|
|
PA20Pacer
Senior Member Joined: 07 Mar 2012 Location: Illinois (LL22) Status: Offline Points: 161 |
Post Options
Thanks(0)
|
Hi Clydeps-
From your description, I can certainly see why it would be useful to have the Australian Class E airspace boundaries depicted. In the continental US, most airspace above either 700 or 1200 AGL is Class E. Depicting the boundaries between the 700 and 1200 AGL Class E airspace would add a lot of clutter to the display for information that has limited significance to a pilot in the US. It seems that an ideal solution would be to have an option to turn the depiction of the Class E airspace boundaries on or off. I wonder whether they are included in the Jeppesen Navdata database? Regards, Bob
|
|
Bob Siegfried, II
Brookeridge Airpark (LL22) Downers Grove, IL |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |