IFD540 Arrival time

No.   Here's what's in 10.1.1:

1. Update Nearest Airport to Destination When Filter Changes - When the filter used to define displayed/usable airports changes, the criteria used to update the nearest airport to destination list will now be updated too. (Enhancement)

2. Add Mx Mode Capability to Test Transponder Discretes - Adds a capability in Maintenance Mode for installers to validate and/or troubleshoot transponder installations (e.g. test Air vs Ground transition) (Enhancement)

3. Add Port Monitor Capability to Maintenance Mode - Adds a capability in Maintenance Mode for installers to validate the data streams in/out of each com port. (Enhancement)

4. Persist the User Option selection for FLTA On/Off - Persists the User Option selection for FLTA On/Off across power cycles. (Enhancement)

5. LSK Label Change - The LSK soft title on the AUX page, Status tab changes from “Select” to “Status” for additional clarity. (Enhancement)

6. Increase Refresh Rate of NRST Page - Improve the displayed bearing and distance fields of each Nearest row to be updated in real time (up from the present 15 sec refresh rate). (Enhancement)

7. Improve AviCurve Dimming Curve - Alters the impact of the slope parameter to allow the maximum slope value to permit 100% brightness setting instead of the previously capped 21% value after significant feedback from installers and end users. (Enhancement)

8. Removes Nuisance FLTA Off and FLTA Inhibited CAS Messages - Previous to this change, when an external TAWS system was present, the system would display a permanent “FLTA Off” or “FLTA Inhibited” CAS message depending on aircraft position. While technically true, this was considered a great nuisance to installers and customers who were equipped with external TAWS to include a constantly lit “MSG” lamp. This change suppresses those CAS messages when external TAWS is present. (Enhancement)

9. Makes More CAS Messages Delete on Ack - Changes several CAS messages behavior to be delete on acknowledgement in an effort to reduce persistence of nuisance “MSG” lamp. (Enhancement)

10. Restore Aural Alerts Volume Adjust Capability in TAWS Aircraft - Restores the inadvertent removal of the aural alert volume adjust capability and bar when an external TAWS system is present. Previously, by selecting the external TAWS system in Mx Mode, the aural alert volume adjust capability was removed which didn’t permit the non-TAWS aural alert volumes to be adjusted. (Bug Fix)

11. Fix Info Map Display - Fixes a defect where the lower half of the map thumbnail on the INFO tab of the FMS page was missing when the main map was in heading up mode. (Bug Fix)

12. Improve Pilot Controlled Lighting/Super AWOS Triggering - Improves the quick on/off cycling of the VHF transmit function to permit the 5 click in 5 seconds and 7 click in 5 second triggers for PCL and Super AWOS. Previously, quick mic clicks could be missed due to slow transmit or clipping behaviors. (Bug Fix)

13. Fix IFD440 Boot Behavior - Corrects a defect where an IFD440 could occasionally boot as an IFD540 which provided offset display pages. (Bug Fix)

14. Improve OBS Deadband Behavior - Improves precision and responsiveness of pilot controlled OBS course setting. The previous implementation had some lag in responsiveness such that it became difficult to control the OBS course setting without overshooting the desired course setting or it required excessively slow and methodical course setting pilot techniques. (Enhancement)

15. Fixed Clipped and/or Distorted Charts - Corrects a defect in which some Approach and Procedure charts were clipped or visually distorted. (Bug Fix)

16.  Improvements to OBS Control - changes to help in OBS control behavior (Enhancement)

17. Improves Map Popup Depiction of Airspace Altitudes - Improves the resolution of the map popup information box depiction of airspace in dense and overlapping airspace regions. (Enhancement)

18. Corrects Jump in Display Field of View - Corrects a defect that resulted in a jump in the field of view of the User Options page when using a specific combination of touch and knob inputs. Previously, if an edit were made to a User Option parameter using the specific combination of touch and knob input, the change would take hold but the page would jump to display a different section of the page. (Bug Fix)

19. Transmit Pressure Altitude - Adds the Pressure Altitude 429 label to the output stream of the IFD to facilitate integration with ADS-B In receivers. (Enhancement)

20. Correct Standby Com Monitor Volume Attenuation Defect - Corrects a defect that would attenuate the volume of the active and standby com frequency channels to 50% when the Standby Com Monitor function of the audio panel was selected for use. (Bug Fix)

21. Correct Conflict in FIS-B Regional vs CONUS Radar Depiction - Corrects a defect that would incorrectly depict weather radar tiles when a combination of range changes and product display selections were made. (Bug Fix)

22. Enable Display of OBS Legs on EX5000, EX600, EX500 Displays - Adds OBS leg information to the output stream of the IFD to facilitate display of that active OBS leg on the Avidyne legacy MFDs. (Enhancement)

23. Stored Route Retrieval Recalls Proper Airway - Corrects a defect where a route containing overlapping airways gets stored and then later retrieved for use but would use the “other” overlapping airway which was a source of confusion to the user. (Bug Fix)

24. Correct Non-Responsive Frequency Swap Command - Corrects a defect where a specific set of touches and bezel control inputs would make the frequency swap function lock out. (Bug Fix)

25. Enhance GPS Pulse Per Second (PPS) Signal Precision - Enhances the precision of the periodicity of the PPS signal to be ARINC compliant to facilitate future integration with ADS-B transceivers. (Enhancement)