standy by audio |
Post Reply |
Author | |
tony
Senior Member Joined: 06 Dec 2011 Location: Atlanta Status: Offline Points: 466 |
Post Options
Thanks(0)
Posted: 18 Nov 2014 at 7:53pm |
I know I'm going to have to wire up the standby audio from the 540 to the 240 so when the software update comes out, the wiring will be in place to use the enhancement. I'm looking at pages 57 and 58 of the 540 installation manual. Specifically I'm looking at connector P1002. The standby audio is not listed. Is the standby audio found on the reserved pins 23, 24, and /or 25? |
|
edanford
Senior Member Joined: 21 Nov 2011 Location: Austin Tx Status: Offline Points: 116 |
Post Options
Thanks(0)
|
On the IFD, you need to wire two output signals to the audio panel. The IFD pins are: P1006, Pin 7 - Com Monitor Audio Hi P1006, Pin 34 - Com Monitor Audio Lo |
|
Ed
|
|
AviJake
Admin Group Joined: 26 Mar 2009 Location: Lincoln MA Status: Offline Points: 2815 |
Post Options
Thanks(0)
|
Steve Jacobson
sjacobson@avidyne.com |
|
1964-m20e
Groupie Joined: 19 Aug 2013 Location: New Orleans Status: Offline Points: 69 |
Post Options
Thanks(0)
|
Help me some what is standby audio?
|
|
edanford
Senior Member Joined: 21 Nov 2011 Location: Austin Tx Status: Offline Points: 116 |
Post Options
Thanks(0)
|
It is the ability to listen the frequency that is in the secondary (would be moved to primary ) position of the IFD540 i.e. you can listen to two frequencies at once with this feature in the IFD540.
You may transmit on the primary only. This is not enabled in current SW but will at some point in the future |
|
Ed
|
|
Awful Charlie
Groupie Joined: 24 Oct 2013 Location: LFGB Status: Offline Points: 53 |
Post Options
Thanks(0)
|
Can we have the standby freq. monitor as a function on the IFD please? Reason being the audio panel aux. inputs are tied up in EU land with DME and ADF. FWIW, the GNS480 does this ;-)
Edited by Awful Charlie - 10 Dec 2014 at 4:11pm |
|
oskrypuch
Senior Member Joined: 09 Nov 2012 Location: CYFD Status: Offline Points: 3061 |
Post Options
Thanks(0)
|
I believe I read here that that will be included in 10.1. With 10.0.3 due out in January (?), it will be some time after that. * Orest |
|
AviJake
Admin Group Joined: 26 Mar 2009 Location: Lincoln MA Status: Offline Points: 2815 |
Post Options
Thanks(0)
|
Agreed. We add support for standby audio in Release 10.1 which should be early spring 2015.
|
|
Steve Jacobson
sjacobson@avidyne.com |
|
brou0040
Senior Member Joined: 13 Dec 2012 Location: KIYK Status: Offline Points: 720 |
Post Options
Thanks(0)
|
I think Awful Charlie's point was missed. He was hoping that the audio combination would be done in the IFD rather than in the audio panel. You'd just stay on com1 on the audio panel, but you could hit some sort of monitor button on the IFD such that it is then combined in the IFD and heard on the audio.
His issue is that if he doesn't have a monitor button and his other switched inputs are not available, he can't use this feature, but he could if it was enabled in the IFD. I was originally thinking I agreed with this, but this would limit any spacial separation capabilities of the newer audio panels. I love the 3D audio demos (yet to see if I find it useful in flight) and having this as a separate line to the audio panel allows you to spatially locate this monitored frequency.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |