No GPS signal on startup

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello and thank you in advance for any assistance you can provide.
I fly a 2009 Vans RV10 equipped with dual Advanced Flight Systems 5600 EFIS, a Dynon AP (not Dyson per spellcheck), and an Avidyne 440 GPS/Nav/Com.  I do not know when the GPS was installed.

For several weeks now I am experiencing difficulty with "GPS integrity" on my EFIS screens, and a red X and no GPS signal or similar message on my Avidyne unit.  IFD Software version is 10.2.2.0.

IF I stay on the ground long enough the message goes away.  Forced reboots don't seem to help.  If I take off the GPS starts working during the flight.

My AFS/Dynon stuff has a VFR GPS, a dynon 250 I think.  This always has satellites when I check.

I've read that these symptoms are what can happen when an internal battery in the unit goes bad as the unit has to look for satellites afresh, with a good battery these things are remembered at start up.

The GPS does not fail in flight.

In this first video you see the message, GNAV 1 is the Avidyne unit.https://www.youtube.com/watch?v=kyzYHqmV6cU

In this 2nd video we can see where the Dynon GPS has signals at start up and the Avidyne does not.  https://youtu.be/hlr6AoMT2pQ?si=2TuHz9U_9OPZFKjF

So, is the internal battery causing my problems?  If so, how do I get it replaced, how much does it cost?  Is a loaner unit available?  How long does this take?

If this is not likely my problem, how do I troubleshoot this further?

Again, thank you.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
N943MA Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 hours 30 minutes ago Location: PGV Status: Offline Points: 2	Post Options Post Reply Quote N943MA Report Post Thanks(0) Quote Reply Topic: No GPS signal on startup Posted: 8 hours 10 minutes ago at 8:58pm
	Hello and thank you in advance for any assistance you can provide. I fly a 2009 Vans RV10 equipped with dual Advanced Flight Systems 5600 EFIS, a Dynon AP (not Dyson per spellcheck), and an Avidyne 440 GPS/Nav/Com. I do not know when the GPS was installed. For several weeks now I am experiencing difficulty with "GPS integrity" on my EFIS screens, and a red X and no GPS signal or similar message on my Avidyne unit. IFD Software version is 10.2.2.0. IF I stay on the ground long enough the message goes away. Forced reboots don't seem to help. If I take off the GPS starts working during the flight. My AFS/Dynon stuff has a VFR GPS, a dynon 250 I think. This always has satellites when I check. I've read that these symptoms are what can happen when an internal battery in the unit goes bad as the unit has to look for satellites afresh, with a good battery these things are remembered at start up. The GPS does not fail in flight. In this first video you see the message, GNAV 1 is the Avidyne unit.https://www.youtube.com/watch?v=kyzYHqmV6cU In this 2nd video we can see where the Dynon GPS has signals at start up and the Avidyne does not. https://youtu.be/hlr6AoMT2pQ?si=2TuHz9U_9OPZFKjF So, is the internal battery causing my problems? If so, how do I get it replaced, how much does it cost? Is a loaner unit available? How long does this take? If this is not likely my problem, how do I troubleshoot this further? Again, thank you.