IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM

Print Page | Close Window

No Data From Input #1

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1026
Printed Date: 31 Oct 2024 at 8:12pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: No Data From Input #1

Posted By: lolsen94
Subject: No Data From Input #1
Date Posted: 02 Apr 2016 at 9:26am

Has anybody had the problem with their IFD540 providing the message "No Data from Output #1."

Replies:

Posted By: lolsen94
Date Posted: 02 Apr 2016 at 9:27am

Sorry; "No 429 from input: #1"

Posted By: AviJake
Date Posted: 02 Apr 2016 at 9:58am

No but if you go into Maintenance Mode and look at the first page on the CONFIG tab (should be your ARINC429 port settings) you should see what device the IFD is configured to communicate with over ARINC port #1 which will give you a clue what device is not sending the data.

-------------
Steve Jacobson
sjacobson@avidyne.com

Posted By: lolsen94
Date Posted: 02 Apr 2016 at 10:13am

Thanks for responding. I failed to put in the message that it says "No 429 input from #1." I spoke with Christine down in Florida and it is my PFD. Coincidentally, the era began when they downloaded 10.1.2. I just wanted to see if anybody else was having a problem as it has not been resolved.

Posted By: lolsen94
Date Posted: 02 Apr 2016 at 10:14am

Steve, are you also a pilot?

Posted By: Jack Seubert
Date Posted: 02 Apr 2016 at 10:47am

Lolsen94,

You might look on the Avidyne website under leadership team, Start with the Sr. VP Product MGT...

Also lots of posts from Steve about test flying through out AvidyneLive on nearly all the General topics.

There are tons of useful information about your IFD 541!

Jack

-------------
Jack Seubert