intersection names
Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1068
Printed Date: 28 Apr 2024 at 7:33pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: intersection names
Posted By: jblodgett
Subject: intersection names
Date Posted: 10 May 2016 at 9:17am
|
How do you turn on intersection names? On the map set-up page it looks like you should be able to put a check-mark next to intersection names but I can't figure out how to do that. Thanks in advance, Jim B |
Replies:
Posted By: AviSimpson
Date Posted: 10 May 2016 at 9:53am
|
To turn the intersections on, it's located on the AUX Page under "MAP Setup" LSK. You can use the inner knob to highlight the blank space after "Intersection" and push in on the right knob to have the check mark appear under "Show Label". There is some guidance on Page 4-34 on the IFD540 Rev02 Pilots Guide. ------------- Simpson Bennett Avidyne Corporation Product Manager |
Posted By: jblodgett
Date Posted: 10 May 2016 at 10:00am
|
Thanks. The "push in the right knob" was the part I was missing. |
Posted By: AviJake
Date Posted: 10 May 2016 at 10:19am
As long as the Nav Priority
slider is not set to "off", the checkmark will show when you push. ------------- Steve Jacobson sjacobson@avidyne.com |