Test
Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1501
Printed Date: 17 May 2025 at 9:31am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Test
Posted By: AviSteve
Subject: Test
Date Posted: 20 Apr 2018 at 1:25pm
|
We've been having issues with the forum, so this is just a test topic. If you see this, please post back saying so. Thanks for the help. ------------- Steve Lindsley Avidyne Engineering |
Replies:
Posted By: Heno
Date Posted: 20 Apr 2018 at 1:38pm
| so |
Posted By: tbrekken
Date Posted: 20 Apr 2018 at 1:51pm
| steve, it works! |
Posted By: AviSteve
Date Posted: 20 Apr 2018 at 1:54pm
I like it. You guys are very clever :) ------------- Steve Lindsley Avidyne Engineering |
Heno wrote:Posted By: HenryM
Date Posted: 20 Apr 2018 at 2:00pm
| I see this without issue on my iPad. |
Posted By: HenryM
Date Posted: 20 Apr 2018 at 2:05pm
| It does seem to take a while to actually transmit the post. I’m not sure if that issue is on my end or yours. |
Posted By: nrproces
Date Posted: 21 Apr 2018 at 11:36am
|
"SO"
------------- Sauce |
Posted By: oskrypuch
Date Posted: 21 Apr 2018 at 4:53pm
| So. |
Posted By: CardinalRG
Date Posted: 21 Apr 2018 at 9:46pm
| so |
Posted By: CardinalRG
Date Posted: 21 Apr 2018 at 9:57pm
| so |
Posted By: AZ Flyer
Date Posted: 22 Apr 2018 at 1:15am
| Seeing everything just fine. However, the screen froze up when I hit the post button, even though it apparently had posted properly. |
Posted By: Rangemaster_Tango
Date Posted: 23 Apr 2018 at 8:30pm
| Test |
Posted By: paulr
Date Posted: 24 Apr 2018 at 7:09am
| Read you 5x5. How me? |
Posted By: afassas
Date Posted: 24 Apr 2018 at 9:04am
|
I'm online. Active status of my account was set as "inactive" in the server shuffle. Only recently activated before that. Avidyne IT fixed it. ------------- Alex Fassas Avidyne IFD-540 Lynx NGT-9000+ Aspen MAX PFD1000, MFD1000 & MFD500 Beech A36 KRGA |
Posted By: AviSteve
Date Posted: 24 Apr 2018 at 5:15pm
Loud and clear :) Things are slowly getting better. I'm still unable to upload images, but I'm pestering IT to fix it. ------------- Steve Lindsley Avidyne Engineering |
Posted By: AviSteve
Date Posted: 24 Apr 2018 at 5:27pm
I'm not sure how you got that activated, but glad you did. If anyone else runs into this problem, you obviously can't post, so just email me at slindsley at avidyne.com and we'll get you fixed up. I've actually gone through the membership list lately and found a few on my own to activate, but probably didn't get them all. ------------- Steve Lindsley Avidyne Engineering |
Posted By: paulr
Date Posted: 25 Apr 2018 at 9:09am
| Yesterday it was taking 2+ minutes from clicking "post reply" until the reply appeared and now it is <3 sec, so yay for Avi IT! |
Posted By: rpostmo
Date Posted: 25 Apr 2018 at 8:51pm
|
I'm on. |
Posted By: oskrypuch
Date Posted: 25 Apr 2018 at 10:44pm
|
Impressive improvements in the speed and stability of the site. * Orest |
Posted By: paulr
Date Posted: 26 Apr 2018 at 7:44am
| One oddity: the new forum software seems to be arbitrarily creating hyperlinks. For example, if you look at the "new ADS-B wx products" thread, you'll see that there are links added to the terms "Skytrax", MLB100", and "Avidyne" that go to various (mostly incorrect) places. |
Posted By: AviSteve
Date Posted: 26 Apr 2018 at 9:48am
I've noticed that too, and I'm investigating. Very annoying. ------------- Steve Lindsley Avidyne Engineering |
Posted By: afassas
Date Posted: 26 Apr 2018 at 6:21pm
The HOW I got my AvidyneLive account reactivated, is a WHO. I had been working with Anne Epperson in Avidyne Customer Relations on trial Jeppesen subscription and getting warranty dates correct. I mentioned this issue and she sent my request on to your IT folks. Done. She is uber helpful and fast response. Much appreciated. ------------- Alex Fassas Avidyne IFD-540 Lynx NGT-9000+ Aspen MAX PFD1000, MFD1000 & MFD500 Beech A36 KRGA |
Posted By: HenryM
Date Posted: 27 Apr 2018 at 1:38pm
|
I thought I’d report an issue that I’m having accessing the forums. It seems to work when outside my corporate network, but when I am connected to it I get an error that says Safari cannot open the page because it could not connect to the server. If I try using https://Forums.avidyne.com, then the error says that Safari can’t establish a secure connection. This all used to work before the last changes. Our IT department is not particularly picky about allowing access to external sites. We haven’t had any changes on our side.
|
Posted By: AviSteve
Date Posted: 27 Apr 2018 at 3:14pm
Are you sure that the old site used to work with secure connection (i.e. https)? ------------- Steve Lindsley Avidyne Engineering |
Posted By: oskrypuch
Date Posted: 27 Apr 2018 at 3:31pm
|
I'm pretty sure it was always unsecured, http only. * Orest |
Posted By: HenryM
Date Posted: 27 Apr 2018 at 4:12pm
No. I always had a bookmark to the http site. I just tried https because many sites are moving to implement more security. I don't know why all of a sudden I'm having a problem connecting to the http site.
|
Posted By: AviSteve
Date Posted: 27 Apr 2018 at 4:29pm
It could be that your browser still has the old site cached. My only suggestion is to reload without the cache or clear your cache so that it will for sure go out to the right address. ------------- Steve Lindsley Avidyne Engineering |
Posted By: HenryM
Date Posted: 27 Apr 2018 at 6:35pm
| I'll try that and report back, Steve. It will probably be a while before I get a chance. |
Posted By: AviSteve
Date Posted: 01 May 2018 at 9:51am
|
We're still working some email notification issues. afassas (Alex), please reply letting me know whether you got an email notification of this post. ------------- Steve Lindsley Avidyne Engineering |
Posted By: HenryM
Date Posted: 01 May 2018 at 11:13am
|
I tried clearing the cache and cookies, but still get an error that the server cannot he reached. I’m sure it is something on my end not finding the Jp address of the site. The name server must not know the site’s address. As soon as I disconnect from the WiFi service and try with my cellular connection, everything works. We do have a site blocker, but it is not being activated.
I don’t know how to make the name server refresh it’s address list. It seems to know the server exists, but it can’t reach it.
|
Posted By: chflyer
Date Posted: 01 May 2018 at 12:26pm
|
I tried to upload an image with a posting and it just timed out. Repeated attempts over a longer time span didn't change anything. Size was about 600k jpg. Is this a known issue? ------------- Vince |
Posted By: HenryM
Date Posted: 01 May 2018 at 3:59pm
| All of a sudden, I can reach the forums. I don't know how the issue got fixed. |
Posted By: AviSteve
Date Posted: 01 May 2018 at 4:22pm
Yes, image uploads are a known issue and it has yet to be resolved. ------------- Steve Lindsley Avidyne Engineering |
Posted By: afassas
Date Posted: 18 May 2018 at 12:17pm
|
Steve, Per my separate email reply, I was not getting email notifications from the forum until I logged in and viewed the forum. I also checked my "subscriptions" in my Member Control Panel. It seems that notification emails started flowing after I logged in to the forum again. Thanks, all good now. ------------- Alex Fassas Avidyne IFD-540 Lynx NGT-9000+ Aspen MAX PFD1000, MFD1000 & MFD500 Beech A36 KRGA |
Posted By: AviSteve
Date Posted: 18 May 2018 at 1:04pm
OK good, thanks. Looks like the forum might be back to 100%. ------------- Steve Lindsley Avidyne Engineering |