IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM - Missing waypoint in KWHP RNAV (GPS)-C Navdata

Print Page | Close Window

Missing waypoint in KWHP RNAV (GPS)-C Navdata

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1542
Printed Date: 28 Apr 2024 at 8:33pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: Missing waypoint in KWHP RNAV (GPS)-C Navdata

Posted By: eallevato
Subject: Missing waypoint in KWHP RNAV (GPS)-C Navdata
Date Posted: 25 Jun 2018 at 12:15am

It seems that the "5.6NM to RW12" waypoint in the KWHP RNAV (GPS)-C approach is missing from the Jepp navdata. I have the latest cycle (1807).

Here is the plate:

When I use the IFD100 app to create a flight plan and insert the procedure, the route does not show the "5.6 NM to RW12" waypoint. I created a user defined waypoint, however it does not show up as an option when I try to insert it between NAFFU and RW12.

Here is the picture of the missing waypoint in the procedure:

Questions:

1) Is the missing waypoint a bug from Jepp?

2) Can I not insert a user defined waypoint in a defined RNAV procedure section in the flight plan?

Thanks in advance

Gene

Replies:

Posted By: AviSteve
Date Posted: 25 Jun 2018 at 8:12am

eallevato wrote:

1) Is the missing waypoint a bug from Jepp?

2) Can I not insert a user defined waypoint in a defined RNAV procedure section in the flight plan?

1. That waypoint is not in the database. I'll check with Jepp to find out why.

2. Correct, you cannot insert a waypoint within an approach.

-------------
Steve Lindsley
Avidyne Engineering