EX-Series Multi-Function Displays - DAU Needed but overhaul cost outrageous

Print Page | Close Window

DAU Needed but overhaul cost outrageous

Printed From: Avidyne
Category: Avidyne General
Forum Name: EX-Series Multi-Function Displays
Forum Description: Topics related to the Avidyne EX500, EX600, and EX5000 Multi-Function Displays (MFDs)
URL: http://forums.avidyne.com/forum_posts.asp?TID=1656
Printed Date: 24 Nov 2024 at 7:13pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: DAU Needed but overhaul cost outrageous

Posted By: wilibar
Subject: DAU Needed but overhaul cost outrageous
Date Posted: 17 Dec 2018 at 11:31am

My EGTs are not displaying on my Avidyne Entegra MFD. Everything else displays normally. It seems the DAU (Data Aquisition Unit) requires repair. Apparently a company, Radiant Power, has bought out the original manufacturer Moritz. The cost to overhaul the unit is now $3750 when I called Radiant Power.

There needs to be a better option as this is an expensive repair. Does anyone have a DAU for sale? Avidyne should build a replacement since there seems to be thousands out there that'll need servicing.

-------------
On-demand air charter operator, Cirrus SR22, based in Miami. Instantly check availability, pricing and book online anytime on our web app https://aviatorservices.com

Replies:

Posted By: Catani
Date Posted: 17 Dec 2018 at 11:50pm

Have you had your mechanic or avionics shop check the integrity of the connectors and wiring between the DAU and sensors? From what I read, that's usually the cause - rarely the DAU itself. But check your connectors at the firewall first, it's common for them to loosen up over time.

Posted By: Ibraham
Date Posted: 19 Dec 2018 at 10:02am

We had a similar problem with the RPM being very erratic no change in engine sound, after the flight we sprayed some contact cleaner at the connector on the firewall and wiggled it, that fixed the problem. The connectors on the firewall are exposed to the elements, and sometimes some corrosion causes problems. Another option is to spray Corrosion-X on all the connectors, that will also protect other parts. Check with your mechanic before you start removing parts.