IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM

Print Page | Close Window

PIN # for Configuration

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1979
Printed Date: 02 May 2024 at 9:52am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: PIN # for Configuration

Posted By: Flybuddy
Subject: PIN # for Configuration
Date Posted: 24 Apr 2020 at 11:51am

Trying to configure for a JPI FS 450 fuel flow. From what I see it supposed to be set as C7 for GPS data on the FS 450 and SHADIN FADC on the 232 configuration page in the IFD440.

When I go into maintenance mode and hit the config tab to check the setup, the 440 wants a PIN#. Where do I get that??

I was able to take pics of config pages back in Feb before last software update so the PIN is something new.

The pic of the 232 config page back then was:

CHANL 1 input SHADIN FUEL output AVIATION

CHANL 2 input SHADIN ADC output OFF

I think this is correct.

Replies:

Posted By: Flybuddy
Date Posted: 24 Apr 2020 at 3:06pm

Update...called tech support and they were able to email a small update file to bypass it. Security PIN was an add on during the last update.