Cannot download MFD Engine data.
Printed From: Avidyne
Category: Avidyne General
Forum Name: EX-Series Multi-Function Displays
Forum Description: Topics related to the Avidyne EX500, EX600, and EX5000 Multi-Function Displays (MFDs)
URL: http://forums.avidyne.com/forum_posts.asp?TID=1982
Printed Date: 21 Nov 2024 at 8:50pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Cannot download MFD Engine data.
Posted By: Lance 33
Subject: Cannot download MFD Engine data.
Date Posted: 25 Apr 2020 at 8:57pm
|
For last 11 years in my Cirrus SR20 I have been downloading very easily from MFD engine data for Cirrus Reports and and Savvy. But after last 4 flights I have not been able to download any engine data. Is USB full? Does USB need reformatting? Any suggestions please? Thanks Lance ------------- Lance |
Replies:
Posted By: Ibraham
Date Posted: 26 Apr 2020 at 1:17am
| Save the data on the USB drive to your computer, then quick format it. Or use another USB drive, smaller than 512 MB, format it to FAT (Not FAT 32) |
Posted By: Lance 33
Date Posted: 28 Apr 2020 at 4:17am
|
Hi, Thank you. I have followed your advice and now have FAT fomat showing 99% free space. My USB is 1,000 MB capacity and has worked happily for 11 years. It seems to me that the USB Port on MFD may have developed a fault? Is there a way that I can check for that. My Plan B is to work out how my BAD Elf Wombat can accept the engine data on a SD card? Thanks. Lance ------------- Lance |
Posted By: Catani
Date Posted: 28 Apr 2020 at 11:42am
That's remarkable. My 2GB USB drives don't usually last more than two or three years - but they're dirt cheap and I buy them in bulk. Given my experience, I think it more likely that your USB stick, rather than your MFD, has the problem.
|
Lance 33 wrote:Posted By: LarryPetro
Date Posted: 28 Apr 2020 at 12:44pm
|
My EX5000's USB port failed a few years ago. I chased the possibility of a bad USB stick for quite a while before taking my plane to an avionics shop. Working with Chris Evans, my shop determined pretty quickly that the port itself was indeed dead. The EX5000 was sent in for repair under warranty. I did end up with 2 GB USB sticks, too. They continue to work without any problems. ------------- Larry Petro - Columbia 350 @ KFME |
Posted By: Lance 33
Date Posted: 01 May 2020 at 8:36pm
|
Hi Guys, Thanks for info. Have been in touch with Avidyne and they are suggesting that as Nav data from Jepp increases in size this may prevent engine data from downloading. Solution is to install a larger 2 GB Compact Flash Card from Avidyne. As it has been suggested my 11 year old ancient USB stick may be the problem I will buy some new ones to eliminate this possibility. I ran a diagnostic on my USB stick and Lap Top said it had no faults and was working. Is that a definitive test? Or could it still be faulty? Thanks Lance ------------- Lance |
Posted By: Ibraham
Date Posted: 01 May 2020 at 8:48pm
| Do you have any files on the USB drive? If you do, either delete them or do a quick format and try it again, if you have not done so already |
Posted By: LarryPetro
Date Posted: 01 May 2020 at 9:34pm
|
I don't know if it's necessary, but I do use 3 sticks: one for nav data, one for charts, and one for engine logs. ------------- Larry Petro - Columbia 350 @ KFME |