TAS600 Systems and ADS-B - Upgrade Tas600

Print Page | Close Window

Upgrade Tas600

Printed From: Avidyne
Category: Avidyne General
Forum Name: TAS600 Systems and ADS-B
Forum Description: Topics related to the Avidyne TAS600 Traffic Advisory Systems and ADS-B
URL: http://forums.avidyne.com/forum_posts.asp?TID=2343
Printed Date: 22 Nov 2024 at 4:41am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: Upgrade Tas600

Posted By: Warrenwhis
Subject: Upgrade Tas600
Date Posted: 20 Mar 2022 at 8:35pm

I have had problems with my Ryan 9900BX seeing traffic on my Avidyne IFD540. After much wrangling, including tech support with Avidyne, they say it needs the latest mod. Well that runs about $4k. It involves going thru a dealer, but they cant do it. They have to send it to Avidyne to get it done. So I thought I would save some time and money and buy a unit that already had the mods done on it. It appears the mod is an 8. My unit only had a 4. But when I installed it, the error message on startup with the Avidyne IFD540 was “no traffic”. Does the IFD540 have to be reconfigure with each unit?

Replies:

Posted By: Warrenwhis
Date Posted: 23 Jul 2023 at 11:56am

Update to the problems mentioned above. I decided to add the traffic thumbnail to my display and to my surprise the thumbnail displays the traffic, but the MFD does not most of the time. I had a plane fly directly overhead at 2k ft and the avidyne map never showed it.

Posted By: AviSteve
Date Posted: 24 Jul 2023 at 10:01am

You said that the Avidyne map never showed the traffic. If you're talking about the IFD map, then perhaps you just have the "Non-TA Traffic" layer turned off. Go to the setup page under the Map category to check that.

But you also mentioned the "MFD", so I wasn't sure if you meant a separate MFD such as the EX5000.

-------------
Steve Lindsley
Avidyne Engineering

Posted By: Warrenwhis
Date Posted: 25 Jul 2023 at 10:05am

thank you Steve, I was using the term MFD to refer to the IFD540 display.

I will try checking for the non TA layer option when I fly on Friday

Posted By: Warrenwhis
Date Posted: 01 Aug 2023 at 10:50am

enabling the non TA button helped show the traffic on the IFD540 as well as the thumbnail. However the traffic continues to be intermittent.