Print Page | Close Window

Synthetic Vision not working properly

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=2699
Printed Date: 21 Nov 2024 at 6:51pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Synthetic Vision not working properly
Posted By: toddsanderson
Subject: Synthetic Vision not working properly
Date Posted: 07 Nov 2024 at 3:34pm
I have a "new to me SR22" that has Entegra PFD/MFD along with IFD 550/440/DFC90 installed.  Everything works great other than the Synthetic Vision attitude display on the 550 is always showing a pitch down display and never changes.  It is this way on the ground or in the air.  The heading is properly displayed, but attitude is wrong.  I did not see any information on calibrating the unit or any troubleshooting in the manual.  Sorry for the sideways picture - new to this site.  Any info is appreciated.  



Replies:
Posted By: MysticCobra
Date Posted: 09 Nov 2024 at 8:21am
Section 7.5.22 of the Installation Manual has the calibration instructions that might help with your situation.


Posted By: toddsanderson
Date Posted: 20 Nov 2024 at 9:11am
Thank you for the manual. The calibration process fixed the issue.  My installation required a -28 degree offset. The TAS was also not set which I assume helps aid in accuracy in cruise flight. 


Posted By: _phm_
Date Posted: 21 Nov 2024 at 4:29pm
Same issue here. Just installed an IFD550, but the shop didn't configure this.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net