IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM

Print Page | Close Window

Typos

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=459
Printed Date: 17 May 2024 at 12:20pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: Typos

Posted By: oskrypuch
Subject: Typos
Date Posted: 18 Nov 2014 at 2:15pm

Just starting this thread for typos I find, here is the first. No need to acknowledge.

PG p4-36 - ARINC420

* Orest

Replies:

Posted By: oskrypuch
Date Posted: 18 Nov 2014 at 6:18pm

PG p5-8 - In OBS TO (defined as the when the difference ...

Suggest: In OBS TO (when the difference ...

PG p5-9 - In OBS FROM (defined as the difference ....

Suggest: In OBS FROM (when the difference ....

* Orest

Posted By: oskrypuch
Date Posted: 18 Nov 2014 at 9:54pm

PG p5-17 - ... transitioning to 350 feet either side at the runway threshold (slightly looser than a localizer)

Actually, a localizer is always setup to be exactly 700ft wide at the runway threshold, 350ft to either side.

Suggest: ... transitioning to 350 feet either side at the runway threshold (the same as a localizer)

* Orest

Posted By: Royski
Date Posted: 18 Dec 2014 at 10:04am

I might have found a typo in the installation manual as I troubleshoot a communication issue with my Shadin Miniflo fuel computer.

The Avidyne manual refers to a "Shadin 91204XM," which is not a model that appears in The Google. [EDIT or perhaps this typo originated with G***** ] The Miniflo is a 91204XT-D and the Microflo is 91204XT-38-D. Can I assume that 9204XM in the installation manual is intended to be 91204XT?

Posted By: AviJake
Date Posted: 18 Dec 2014 at 1:14pm

Yes, those Shadin fuel flow computers have a typo. They are correct in the installation drawings in the back of the book but the data listed in Section 2.3 Interfaces and in Section 7.5.3 RS-232 Port Configurations are wrong and will be corrected in the Install Manual that comes out with Rel 10.0.3.0.

The Shadin fuel flow's that are supported include:

91204XT(38)D Miniflo-L
91204XT-D Miniflo-L
91053XP Digiflo-L
91053XT-D Digiflo-L
91802-() DigiData

-------------
Steve Jacobson
sjacobson@avidyne.com

Posted By: sikhpilotmd
Date Posted: 23 Mar 2015 at 6:46am

My 540 s are not getting any input from the miniflo. The installer says all the wiring is good. Any suggestions?

Posted By: ddgates
Date Posted: 23 Mar 2015 at 9:46am

I've had the same thing since install.

-------------
David Gates

Posted By: AviJake
Date Posted: 23 Mar 2015 at 9:48am

Work fine in our lab and airplanes. Can you send your exact setup page configuration from Mx Mode? It's the RS-232 configuration page I care about and is the 2nd one in Mx Mode Configuration tab. You can also send the logs if that's easier since we can extract the setup from there.

-------------
Steve Jacobson
sjacobson@avidyne.com