TAS600 Systems and ADS-B - TAS620 installation

Print Page | Close Window

TAS620 installation

Printed From: Avidyne
Category: Avidyne General
Forum Name: TAS600 Systems and ADS-B
Forum Description: Topics related to the Avidyne TAS600 Traffic Advisory Systems and ADS-B
URL: http://forums.avidyne.com/forum_posts.asp?TID=697
Printed Date: 22 Nov 2024 at 3:31am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: TAS620 installation

Posted By: VUQUOCLAN
Subject: TAS620 installation
Date Posted: 10 Jun 2015 at 6:22am

Hi There,

Do you know why we need to install a coupler between the transponder ANTENA and TAS620 processor?

Thanks

Replies:

Posted By: Gring
Date Posted: 10 Jun 2015 at 6:40am

I believe it is so the TAS processor knows your transponder and does not display it as traffic.

Posted By: VUQUOCLAN
Date Posted: 10 Jun 2015 at 8:17am

Thanks Garin,

so the suppression signal (pin 15,7) is not good enough for TAS processor to understand it. is it correct?

Thanks

Posted By: Gring
Date Posted: 10 Jun 2015 at 8:26am

That is beyond my pay grade...page 27, section 2.11 of the TAS install guide discusses the transponder coupler.

Posted By: AviSimpson
Date Posted: 10 Jun 2015 at 9:13am

Gring wrote:

I believe it is so the TAS processor knows your transponder and does not display it as traffic.

What Geoffrey said.

-------------
Simpson Bennett
Avidyne Corporation
Product Manager

Posted By: VUQUOCLAN
Date Posted: 10 Jun 2015 at 10:56am

Thanks Gring and AviSimson

I saw that. but is any other reason beside indicating the transponder is transmitting a reply?

does it have anything to do with power limitation?

what is the power output of TAS620?

Thanks again for your knowledge