IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM

IFD 440 specific questions

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=883
Printed Date: 16 Apr 2025 at 2:34pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: IFD 440 specific questions

Posted By: tony
Subject: IFD 440 specific questions
Date Posted: 05 Dec 2015 at 7:40am

So I was waiting for 10.1.1 to come out before I installed my 440, but I got tired of waiting and installed it yesterday. It's funny how spoiled I have become (and didn't realize it) using the cool features of the 540. I never look up frequencies anymore. I just push the the freq button on the 540 and load stuff in (AWOS, unicom, etc.) from the lists.

So I'm looking for the freq button on the IFD 440 and well duh, its not there because there is no room. So when I get home I pull out the manual to see how I can automate the tuning process on the 440. On page 1-16 on the 440 manual its says:

A more automated way to tune a com frequency is to press the “FREQ” button along the right edge of the bezel. This will present a list of likely frequencies and that list can be scrolled via an up/down motion with touch or via twisting the right hand knob. If touch was used, double tap on the row that you want to put into the #1 Standby. If the knob was used to scroll through the list, push the knob in to put the frequency into the #1 Standby slot.

Is this just a cut and paste error or am I missing something? is there a way I can nominate a frequency from the list on the 540 and load it into the standby on the 440?

Replies:

Posted By: tony
Date Posted: 05 Dec 2015 at 8:00am

well I answered one question:

The following list of data will never be shared between two IFDs no matter how they are configured:

Com/Nav frequency selections (therefore no cross-side tuning or display);

Posted By: Jack Seubert
Date Posted: 05 Dec 2015 at 9:50am

-------------
Jack Seubert

Posted By: Jack Seubert
Date Posted: 05 Dec 2015 at 9:57am

Tony,

One neat feature of the 440 described on page 1-17 and 1-18 Frequency list. When I turn that frequency select knob it brings up that Frequency list box just like the 540. Once the page is displayed, you can turn the right knob outer knob, or just touch the label to select a different tab. Give that a try next time you go flying.

Jack

-------------
Jack Seubert

Posted By: tony
Date Posted: 05 Dec 2015 at 12:10pm

Jack, I tried it. Worked just as you described.