IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM

Print Page | Close Window

No Comm Icarus Alt

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=2676
Printed Date: 21 Dec 2024 at 7:42am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: No Comm Icarus Alt

Posted By: rpostmo
Subject: No Comm Icarus Alt
Date Posted: 11 Aug 2024 at 11:09am

What is the setting that gets rid of this notification on startup?

PMA450

NGT9000

IFD540

IFD440

GFC 500

GI275

Bob

Replies:

Posted By: AviSteve
Date Posted: 11 Aug 2024 at 8:30pm

Your RS232 configuration has at least one port set to "Icarus Alt". What's connected to the IFD on that port? If there's nothing on that port, that's the problem. The solution is to set that port to "Off". If there is something connected to that port, then ensure that it truly is supposed to be communicating using the Icarus Alt protocol. If not, that's the problem. The solution is to select the proper protocol for whatever is connected. If something is connected to that port and it is supposed to communicate using the Icarus Alt protocol, then it's likely that the connected device has failed or is configured incorrectly.

-------------
Steve Lindsley
Avidyne Engineering